How to Clean your Motorcycle Helmet the Right Way
A lot of men and even a good number of women prefer to ride the motorcycle as a mode of transportation to get them to their destinations. There are a good couple of reasons for this. Motorcycles are easier to maneuver during traffic build-up hours, it is a faster transport and you can save gas compare it to a car. For some others, riding the motorcycle makes you look cool. Though it is not a secret that accidents is uncommon for motorcycle riders, a mindful driving together with the use of proper riding motorcycle gears and circumspectly following road and traffic regulations can be greatly beneficial to avoid these mishaps.
Motorcycle riders are typically reminded to use the helmet as one of the most essential gears to have alongside knee pads and appropriate footwear. However, like everything that is often used, there comes a time when you notice that your head’s protective gear starts to smell funny. Imagine the scenario: You are riding your motorcycle, looking extremely sharp with your leather jacket and aviator glasses then once you pull off your helmet, you know your whole get up is a shame because of the smelly head gear. What causes a stinking smell is the muddle of sweat, dirt and oils from your head especially your hair. If this is not much of an issue to you, do not be surprised if you start to develop an irritating dandruff aside from the foul smell. For most riders, cleaning their head gear can result to the damage of the helmet but that is a big sham. There are safe and effective ways that you can clean your helmet without it becoming all soggy and unusable after the washing.
Types Of Helmets
- Helmets with removable interior linings
- Helmets that do not feature removable linings
Smart Ways to Clean Your Helmet
1. Identify if you have helmets that have removable or non-removable interior linings. Those with removable linings are easier to clean while the other type is a little trickier to clean but still can be washed.
2. If you have a head gear with removable interior linings, gently and carefully pull out the cheek pads and all other else that is removable in the helmet like the visor and the breathe guard. On the other hand, if you have a non-removable lining for your helmet, you can just leave it in. Don’t try to pull out anything to avoid damage.
3. Once you have removed the linings, the best cleaning agent would have to be a mild shampoo. Choose something that you like. Using a detergent soap can cause irritation in your head if not properly rinsed. The most ideal way to clean the inside of the helmet is to put some shampoo in your hand, make some suds and run your hand in the interior surface of the helmet. Work on every side to ensure that the gear is clean.
4. For the removable pads, you can simply wash it in a tub of lukewarm water with some shampoo. Using lukewarm water will have a disinfecting effect on the foams but be wary that you do not use hot water for cleaning, it can sag the foams. Let it air dry. Air drying is enough for the linings as letting it sit in the sun might cause shrinkage for some materials.
5. As for the outside of the helmet, you are free to use a wet cloth to wipe the exterior of your helmet or use the same shampoo suds. You are also free to use a dish washing or detergent soap on the surface as dirt and dead bugs can stick to the exterior of the helmet. Slightly rub your helmet to remove unwanted dirt. If you decide to use a brush, make sure that it has soft bristles to stay away from scratches.
6. When you are done, rinse everything with clean water. You can just let it air dry as well.
Another good way to clean your protective gear is by using a spray cleaner. It is a cheap alternative to reduce the odor if you do not yet have the time to fully wash your helmet.
Taking good care of your motorcycle gears is essential to have a wonderful riding experience. Keeping them usable for a long time should not be a tough job if your know how to properly use, maintain and clean them.